Characterization and failure analysis of ceramic filters utilized for emission control during coal gasification. Quarterly report, July 1--September 30, 1997

The research activities performed at PV A and M University in the third quarter of 1997 are summarized within. PV A and MU had performed mechanical and back pulse testing to characterize the performance of the filter and is using the process of elimination to perform the failure analysis for filters. The mechanical testing performed on the filters are categorized as follows: the acceleration testing; the vibration testing; the air jet impulse testing; and the impact testing. The major work completed in the third quarter, 1997 for filter back pulse cleaning testing included the following items: (1) the completion of the test system; (2) the procurement of particulate sample; (3) the development of a data acquisition system; (4) the filtration pressure field monitoring with the use of micro-fast pressure sensor assembly; (5) the design of a back pulse system; (6) completed a back pulse cleaning test plan; and (7) started performing parametric testing on particulate removal. The bulk of this report consists of a user`s manual for the automatic testing on instrumentation interfacing

Initial Failure Analysis of Ceramic Filters

Effective high temperature ceramic filters are indispensable in the advanced, coal based power systems (IGCC and PFBC). To meet the environmental particulate emission requirements and improve thermal efficiency, ceramic filters are utilized to cleanup the hot gas particulate to protect downstream heat exchanger and gas turbine components from fouling and corrosion. The mechanical integrity of ceramic filters and an efficient dust cake removal system are the key issues for hot gas cleanup systems. The filters must survive combined stresses due to mechanical, thermal, chemical and steam attack throughout normal operations (cold back pulse cleaning jets), unexpected excessive ash accumulation, and the start up and shut down conditions. To evaluate the design and performance of ceramic filters, different long term filter testing programs were conducted. To fulfill this purpose, two Advanced Particle Filter (APF) systems were complete at Tidd PFBC Demonstration Plant in Brilliant, Ohio in late 1990 as part of the Department of Energy`s (DOE) Clean Coal Technology Program. However, many filter failures 1649 were reported prior to its desired life time. In Tidd APF vessel, 28 filters failed one time, The objectives of this program were to provide an understanding of the factors pertinent to the failures of ceramic filters by characterizing filter properties and the dust cake removal mechanism, Researches were emphasized on understanding of changes of filter properties and back pulse cleaning mechanism to resolve the issues relating to filter permeability variations, ash bridging and micro-thermal cracks induced during cold back pulse cleaning. To perform failure analysis of ceramic filters, thermal numerical simulation, material laboratory analysis on filter materials and dust cake, and measurements on filter properties and back pulse intensity along filter axis within a bench scale filter chamber were conducted

Characterization and optimization of sorbents utilized for emission control during gasification. Quarterly report, January 1--March 31, 1997

The report gives a summary of research activities and accomplishments during the current quarter. One of these is an automatic data acquisition system for automatic measurement of electrical signals and pressure sensor outputs. The bulk of this report is the user`s manual for this automatic test system. It describes the installation, programming, and operation of the test system

Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP

The US will be contributing to the HL-LHC upgrade at CERN with the fabrication and qualification of RFD crabbing cavities in the framework of the HL-LHC Accelerator Upgrade Project (AUP) managed by Fermilab. AUP received Critical Decision 3 (CD-3) approval by DOE in December 2020 launching the project into the production phase. The electro-magnetic design of the cavity was inherited from the LHC Accelerator Research Program (LARP) but needed to be revised to meet new project requirements and to prevent issues encountered during beam tests performed at CERN in the R&D phase. Two prototype cavities were manufactured in industry and cold tested. Challenges specific to the RFD cavity were the stringent interface tolerances, the pole symmetry, and the higher-order-mode impedance spectrum. Chemical processing and heat treatments were performed initially at FNAL/ANL and are now being transferred to industry for the production phase. HOM dampers are manufactured and validated by JLAB. A summary of cold test results with and without HOM dampers is presented.Comment: 21st International Conference on RF Superconductivity (SRF23

How do patient feedback systems work in low-income and middle-income countries? Insights from a realist evaluation in Bangladesh

Background Well-functioning patient feedback systems can contribute to improved quality of healthcare and systems accountability. We used realist evaluation to examine patient feedback systems at health facilities in Bangladesh, informed by theories of citizenship and principal–agent relationships. Methods We collected and analysed data in two stages, using: document review; secondary analysis of data from publicly available web-portals; in-depth interviews with patients, health workers and managers; non-participant observations of feedback environments; and stakeholder workshops. Stage 1 focused on identifying and articulating the initial programme theory (PT) of patient feedback systems. In stage 2, we iteratively tested and refined this initial theory, through analysing data and grounding emerging findings within substantive theories and empirical literature, to arrive at a refined PT. Results Multiple patient feedback systems operate in Bangladesh, essentially comprising stages of collection, analysis and actions on feedback. Key contextual enablers include political commitment to accountability, whereas key constraints include limited patient awareness of feedback channels, lack of guidelines and documented processes, local political dynamics and priorities, institutional hierarchies and accountability relationships. Findings highlight that relational trust may be important for many people to exercise citizenship and providing feedback, and that appropriate policy and regulatory frameworks with clear lines of accountability are critical for ensuring effective patient feedback management within frontline healthcare facilities. Conclusion Theories of citizenship and principal–agent relationships can help understand how feedback systems work through spotlighting the citizenship identity and agency, shared or competing interests, and information asymmetries. We extend the understanding of these theories by highlighting how patients, health workers and managers act as both principals and agents, and how information asymmetry and possible agency loss can be addressed. We highlight the importance of awareness raising and non-threatening environment to provide feedback, adequate support to staff to document and analyse feedback and timely actions on the information

Patient Feedback Systems at the Primary Level of Health Care Centres in Bangladesh: A Mixed Methods Study

This paper documents, and reflects on key strengths and weaknesses of, existing patient feedback management systems at primary health care in Bangladesh and proposes key implications for future policy and practice. A mixed-method study was conducted in two Upazila (sub-district) Health Complexes (UHC) within one district in Bangladesh. It reports qualitative data from thematic analysis of in-depth interviews (n = 15) with key stakeholders; non-participant observations of feedback environment at UHCs; document review; and a stakeholder workshop. Patient feedback data from publicly available web portals were also analyzed. Multiple parallel patient feedback systems exist at health facilities. Key strengths across all systems included common goals of ensuring accountability and patient voice and high-level commitment. Common weaknesses included lack of documented processes, limited awareness of available channels among patients and a lack of documented actions following feedback. The findings helped to provide a few implications for future policy and practice on patient feedback management

Compliance of smokeless tobacco supply chain actors and products with tobacco control laws in Bangladesh, India and Pakistan: protocol for a multicentre sequential mixed-methods study

Introduction: South Asia is home to more than 300 million smokeless tobacco (ST) users. Bangladesh, India and Pakistan as signatories to the Framework Convention for Tobacco Control (FCTC) have developed policies aimed at curbing the use of tobacco. The objective of this study is to assess the compliance of ST point-of-sale (POS) vendors and the supply chain with the articles of the FCTC and specifically with national tobacco control laws. We also aim to assess disparities in compliance with tobacco control laws between ST and smoked tobacco products. Methods and analysis: The study will be carried out at two sites each in Bangladesh, India and Pakistan. We will conduct a sequential mixed-methods study with five components: (1) mapping of ST POS, (2) analyses of ST samples packaging, (3) observation, (4) survey interviews of POS and (5) in-depth interviews with wholesale dealers/suppliers/manufacturers of ST. We aim to conduct at least 300 POS survey interviews and observations, and 6-10 in-depth interviews in each of the three countries. Data collection will be done by trained data collectors. The main statistical analysis will report the frequencies and proportions of shops that comply with the FCTC and local tobacco control policies, and provide a 95% CI of these estimates. The qualitative in-depth interview data will be analysed using the framework approach. The findings will be connected, each component informing the focus and/or design of the next component. Ethics and dissemination: Ethical approvals for the study have been received from the Health Sciences Research Governance Committee at the University of York, UK. In-country approvals were taken from the National Bioethics Committee in Pakistan, the Bangladesh Medical Research Council and the Indian Medical Research Council. Our results will be disseminated via scientific conferences, peer-reviewed research publications and press releases

The global impact of tobacco control policies on smokeless tobacco use: a systematic review

BACKGROUND: Smokeless tobacco, used by more than 300 million people globally, results in substantial morbidity and mortality. For smokeless tobacco control, many countries have adopted policies beyond the WHO Framework Convention on Tobacco Control, which has been instrumental in reducing smoking prevalence. The impact of these policies (within and outside the Framework Convention on Tobacco Control) on smokeless tobacco use remains unclear. We aimed to systematically review policies that are relevant to smokeless tobacco and its context and investigate their impact on smokeless tobacco use. METHODS: In this systematic review, we searched 11 electronic databases and grey literature between Jan 1, 2005, and Sept 20, 2021, in English and key south Asian languages, to summarise smokeless tobacco policies and their impact. Inclusion criteria were all types of studies on smokeless tobacco users that mentioned any smokeless tobacco relevant policies since 2005, except systematic reviews. Policies issued by organisations or private institutions were excluded as well as studies on e-cigarettes and Electronic Nicotine Delivery System except where harm reduction or switching were evaluated as a tobacco cessation strategy. Two reviewers independently screened articles, and data were extracted after standardisation. Quality of studies was appraised using the Effective Public Health Practice Project's Quality Assessment Tool. Outcomes for impact assessment included smokeless tobacco prevalence, uptake, cessation, and health effects. Due to substantial heterogeneity in the descriptions of policies and outcomes, data were descriptively and narratively synthesised. This systematic review was registered in PROSPERO (CRD42020191946). FINDINGS: 14 317 records were identified, of which 252 eligible studies were included as describing smokeless tobacco policies. 57 countries had policies targeting smokeless tobacco, of which 17 had policies outside the Framework Convention on Tobacco Control for smokeless tobacco (eg, spitting bans). 18 studies evaluated the impact, which were of variable quality (six strong, seven moderate, and five weak) and reported mainly on prevalence of smokeless tobacco use. The body of work evaluating policy initiatives based on the Framework Convention on Tobacco Control found that these initiatives were associated with reductions in smokeless tobacco prevalence of between 4·4% and 30·3% for taxation and 22·2% and 70·9% for multifaceted policies. Two studies evaluating the non-Framework policy of sales bans reported significant reductions in smokeless tobacco sale (6·4%) and use (combined sex 17·6%); one study, however, reported an increased trend in smokeless tobacco use in the youth after a total sales ban, likely due to cross-border smuggling. The one study reporting on cessation found a 13·3% increase in quit attempts in individuals exposed (47·5%) to Framework Convention on Tobacco Control policy: education, communication, training, and public awareness, compared with non-exposed (34·2%). INTERPRETATION: Many countries have implemented smokeless tobacco control policies, including those that extend beyond the Framework Convention on Tobacco Control. The available evidence suggests that taxation and multifaceted policy initiatives are associated with meaningful reductions in smokeless tobacco use. FUNDING: UK National Institute for Health Research

Development and Performance of RFD Crab Cavity Prototypes for HL-LHC AUP

The US will be contributing to the HL-LHC upgrade at CERN with the fabrication and qualification of RFD crabbing cavities in the framework of the HL-LHC Accelerator Upgrade Project (AUP) managed by Fermilab. AUP received Critical Decision 3 (CD-3) approval by DOE in December 2020 launching the project into the production phase. The electro-magnetic design of the cavity was inherited from the LHC Accelerator Research Program (LARP) but needed to be revised to meet new project requirements and to prevent issues encountered during beam tests performed at CERN in the R&D phase. Two prototype cavities were manufactured in industry and cold tested. Challenges specific to the RFD cavity were the stringent interface tolerances, the pole symmetry and the higher-order-mode impedance spectrum. Chemical processing and heat treatments were performed initially at FNAL/ANL and are now being transferred to industry for the production phase. HOM dampers are manufactured and validated by JLAB. A summary of cold test results with and without HOM dampers is presented